You are currently browsing all posts tagged with 's engineering'.
Displaying 1 entry.

Plumbing problem

  • Posted on August 26, 2010 at 9:02 am

The problem presented itself as an odd moment. I heard the dog drinking and knew that there’s not SUPPOSED to be water where she was. 1 However…it did not immediately click that I should go up the hill and check on it. I assumed she’d found one of Mama’s many plant pots full of water and went on with the art of weedeater wielding.

Much later that evening, I realized I’d never gone up the hill to check it out. No better time than before the sun drops, so off I went.

The dog was drinking out of a foot-deep freshwater manmade spring.

Say whuuuuut??!!??

Yeah, you read that right. Foot-deep. Freshwater. Manmade. Spring.

Heavy, heavy sigh. Scoop the water out of the hole and see what we’re dealing with.

image

Joy of joys. A pregnant pipe splice. Let’s clear the gunk away, shallwe? After rinsing the mud off and cutting through

image

this much tape, we’re left with this:

image

Which, honestly? was a relief to find. The pipe had truly burst – it wasn’t one of Daddy’s Engineering Projects. After draining the rest of the water out of the hole, the repair looked to be a simple one – 3/4″ coupling, a few feet of pipe, new 3/4″ x 1″ coupling, teflon tape and a screwdriver (to tighten the clamps down with).

Simple on paper. In reality, the couplings didn’t want to seat, I couldn’t get the pipe clamps tight enough and I asked Mama more than once to just call a plumber and let me move on with my life. I did everything right, I know I did…but the water kept spewing out.

There were four separate trips to Lowe’s AND Farmer’s Hardware stores. Lowe’s had the pipe and Farmer’s had the couplings.

I built the thing from the top down first – 3/4 inline coupler to pipe to 3/4 x 1″ adapter. It leaked.

I pulled it apart and cut another section of pipe. Rewrapped the coupler in an OBSCENE amount of teflon tape and built it again.

Still leaking.

I built the thing from the bottom up – 3/4 coupler to pipe to 1″ x 34″ adapter.

Yup, you guessed it. More leaking.

It was Mama’s (Don’t call him Boyfriend, that word is too juvenile) who called attention to The Daily Duuuuuh:

Although the pipe clamps have a slot for a screwdriver, they also work REALLY well with a socket wrench.

  1. by the rope swing on top of the bank []